Why is an old chain unsafe?












8















I recently took my bike in for a service and the mechanic urged me to replace my chain, potentially at great cost (might need a new wheel). He said it might jam or pop off. He couldn't explain to me why my safety might be threatened but repeatedly asserted that it would be threatened.



So, why exactly is an old stretched chain a safety issue? How exactly might I be more likely to crash because of this?










share|improve this question







New contributor




kennyB is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
















  • 1





    I don't know why you'd need a new wheel, unless the sprocket cluster needs replacing and the mechanic bungles things getting it off.

    – Daniel R Hicks
    yesterday






  • 1





    The worst danger you face is the chain could jump off and jam the wheel, but that's more a function of derailer adjustment than chain/sprocket condition. More likely your chain would jam through one of several mechanisms and the crank would "lock" (or, alternatively, "slip"). If this happens at an inconvenient time (eg, in traffic or on a hill) it could result in injury.

    – Daniel R Hicks
    yesterday








  • 11





    If your mechanic said that part of replacing a chain may include a new wheel it may be time to find a new mechanic.

    – David D
    yesterday






  • 9





    Is it possible the mechanic said "you need a new freewheel"?

    – shoover
    yesterday






  • 5





    @shoover And/or a new chain-wheel (=chain-ring). I really can't see why to replace the wheel if this means the rear wheel!

    – Carel
    yesterday


















8















I recently took my bike in for a service and the mechanic urged me to replace my chain, potentially at great cost (might need a new wheel). He said it might jam or pop off. He couldn't explain to me why my safety might be threatened but repeatedly asserted that it would be threatened.



So, why exactly is an old stretched chain a safety issue? How exactly might I be more likely to crash because of this?










share|improve this question







New contributor




kennyB is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
















  • 1





    I don't know why you'd need a new wheel, unless the sprocket cluster needs replacing and the mechanic bungles things getting it off.

    – Daniel R Hicks
    yesterday






  • 1





    The worst danger you face is the chain could jump off and jam the wheel, but that's more a function of derailer adjustment than chain/sprocket condition. More likely your chain would jam through one of several mechanisms and the crank would "lock" (or, alternatively, "slip"). If this happens at an inconvenient time (eg, in traffic or on a hill) it could result in injury.

    – Daniel R Hicks
    yesterday








  • 11





    If your mechanic said that part of replacing a chain may include a new wheel it may be time to find a new mechanic.

    – David D
    yesterday






  • 9





    Is it possible the mechanic said "you need a new freewheel"?

    – shoover
    yesterday






  • 5





    @shoover And/or a new chain-wheel (=chain-ring). I really can't see why to replace the wheel if this means the rear wheel!

    – Carel
    yesterday
















8












8








8








I recently took my bike in for a service and the mechanic urged me to replace my chain, potentially at great cost (might need a new wheel). He said it might jam or pop off. He couldn't explain to me why my safety might be threatened but repeatedly asserted that it would be threatened.



So, why exactly is an old stretched chain a safety issue? How exactly might I be more likely to crash because of this?










share|improve this question







New contributor




kennyB is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.












I recently took my bike in for a service and the mechanic urged me to replace my chain, potentially at great cost (might need a new wheel). He said it might jam or pop off. He couldn't explain to me why my safety might be threatened but repeatedly asserted that it would be threatened.



So, why exactly is an old stretched chain a safety issue? How exactly might I be more likely to crash because of this?







chain safety






share|improve this question







New contributor




kennyB is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.











share|improve this question







New contributor




kennyB is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.









share|improve this question




share|improve this question






New contributor




kennyB is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.









asked yesterday









kennyBkennyB

14314




14314




New contributor




kennyB is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.





New contributor





kennyB is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.






kennyB is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.








  • 1





    I don't know why you'd need a new wheel, unless the sprocket cluster needs replacing and the mechanic bungles things getting it off.

    – Daniel R Hicks
    yesterday






  • 1





    The worst danger you face is the chain could jump off and jam the wheel, but that's more a function of derailer adjustment than chain/sprocket condition. More likely your chain would jam through one of several mechanisms and the crank would "lock" (or, alternatively, "slip"). If this happens at an inconvenient time (eg, in traffic or on a hill) it could result in injury.

    – Daniel R Hicks
    yesterday








  • 11





    If your mechanic said that part of replacing a chain may include a new wheel it may be time to find a new mechanic.

    – David D
    yesterday






  • 9





    Is it possible the mechanic said "you need a new freewheel"?

    – shoover
    yesterday






  • 5





    @shoover And/or a new chain-wheel (=chain-ring). I really can't see why to replace the wheel if this means the rear wheel!

    – Carel
    yesterday
















  • 1





    I don't know why you'd need a new wheel, unless the sprocket cluster needs replacing and the mechanic bungles things getting it off.

    – Daniel R Hicks
    yesterday






  • 1





    The worst danger you face is the chain could jump off and jam the wheel, but that's more a function of derailer adjustment than chain/sprocket condition. More likely your chain would jam through one of several mechanisms and the crank would "lock" (or, alternatively, "slip"). If this happens at an inconvenient time (eg, in traffic or on a hill) it could result in injury.

    – Daniel R Hicks
    yesterday








  • 11





    If your mechanic said that part of replacing a chain may include a new wheel it may be time to find a new mechanic.

    – David D
    yesterday






  • 9





    Is it possible the mechanic said "you need a new freewheel"?

    – shoover
    yesterday






  • 5





    @shoover And/or a new chain-wheel (=chain-ring). I really can't see why to replace the wheel if this means the rear wheel!

    – Carel
    yesterday










1




1





I don't know why you'd need a new wheel, unless the sprocket cluster needs replacing and the mechanic bungles things getting it off.

– Daniel R Hicks
yesterday





I don't know why you'd need a new wheel, unless the sprocket cluster needs replacing and the mechanic bungles things getting it off.

– Daniel R Hicks
yesterday




1




1





The worst danger you face is the chain could jump off and jam the wheel, but that's more a function of derailer adjustment than chain/sprocket condition. More likely your chain would jam through one of several mechanisms and the crank would "lock" (or, alternatively, "slip"). If this happens at an inconvenient time (eg, in traffic or on a hill) it could result in injury.

– Daniel R Hicks
yesterday







The worst danger you face is the chain could jump off and jam the wheel, but that's more a function of derailer adjustment than chain/sprocket condition. More likely your chain would jam through one of several mechanisms and the crank would "lock" (or, alternatively, "slip"). If this happens at an inconvenient time (eg, in traffic or on a hill) it could result in injury.

– Daniel R Hicks
yesterday






11




11





If your mechanic said that part of replacing a chain may include a new wheel it may be time to find a new mechanic.

– David D
yesterday





If your mechanic said that part of replacing a chain may include a new wheel it may be time to find a new mechanic.

– David D
yesterday




9




9





Is it possible the mechanic said "you need a new freewheel"?

– shoover
yesterday





Is it possible the mechanic said "you need a new freewheel"?

– shoover
yesterday




5




5





@shoover And/or a new chain-wheel (=chain-ring). I really can't see why to replace the wheel if this means the rear wheel!

– Carel
yesterday







@shoover And/or a new chain-wheel (=chain-ring). I really can't see why to replace the wheel if this means the rear wheel!

– Carel
yesterday












4 Answers
4






active

oldest

votes


















19














A worn, stretched chain will accelerate wear on sprocket and chainring teeth. There will then be a greater chance that the chain will slip off of and override the sprocket teeth as you apply a power stroke through the crank. When this happens the pedal and your foot suddenly slips downward, which could throw you off the bike, especially if you were off the saddle and standing on the pedals.



A new chain is not usually regarded as a 'great cost'. They are not cheap but not expensive either. There's no reason you need a new wheel, unless there are other problems of course. You probably do need a new cassette though.



Whether you need to replace the chain and cassette depends on your situation, your bike and how you ride. If you have a quality bike, do a lot of miles and want an efficient drivetrain you absolutely should replace it. If you do a few casual miles occasionally and are not experiencing any problems you can probably get away with leaving it as it is.






share|improve this answer



















  • 4





    I'm guessing the asker has a fairly low-specced bike, since most people who have nicer equipment know more about it. In that case, a new chain shouldn't cost more than about 10 dollars/euro/pounds, which is pretty cheap.

    – David Richerby
    yesterday











  • The mechanic said that I "might" need a new cassette, and, if so, this might mean I would also need a new wheel. Sounds like this was just bs? Terrible! Thanks heaps for this everybody. I will definitely change mechanics. It's definitely a problem that so many mechanics are also bike sales stores. Felt like they were just trying to get me to buy a new bike.

    – kennyB
    yesterday






  • 3





    @kennyB, if your chain has been out for a long time, it might have adversely affected the cassette - insofar the mechanic was speaking correctly. If buying a new wheel is cheaper than just replacing the cassette on the existing wheel, I'd look for a new shop... ;)

    – AnoE
    17 hours ago






  • 3





    @kennyB Just what sort of bicycle do you have? The only way I can imagine a competent bike mechanic thinking you need a new wheel is if you have a vintage hub that they don't manufacture cassettes and/or cassette tools for.

    – HAEM
    17 hours ago











  • "A worn, stretched chain will accelerate wear on sprocket and chainring teeth" - would love to see the science behind this as from my own experience I get more life out of the whole lot by continuing a worn chain with a worn cassette, than I ever did replacing chains regularly according to chain wear checkers. I'm not convinced they wear any faster, it's just a new chain won't mesh with a partly worn cassette so will skip, but worn will mesh fine with worn, so long as it's at the same rate. MTBs with 1x set ups and clutch mechs might however help matters.

    – tjmoore
    12 hours ago



















8














As chains stretch, they wear the chainrings and rear cogs and the teeth on them start to become pointed and eventually don't grip the chain so well. The danger is that, when you push on the pedals, the chain slips from tooth to tooth on the chainring, which turns with much less resistance than you were expecting – you just have the friction of the chain slipping against the teeth, rather than the resistance of you driving the bike forwards. When the pedals suddenly turn much easier than you were expecting, you can very easily fall off the bike, especially if you were pushing hard, which is the time the chain is most likely to slip. Any time you fall off the bike while you're just cycling along in traffic is a potential under-a-truck moment. To some extent, you can mitigate this by cycling gently but there's always the risk that you try to pedal hard in some kind of emergency situation, forget that you can't do that, and come off.



Having said that, there is something a little confusing. Maybe you just misunderstood your mechanic, but there's no reason that you should require a new wheel, unless that's completely independent from your need for a new chain. However, you may well need new chainrings and new rear cogs: because the stretched chain wears them to match itself, they'll also skip with a new chain.



Unless you need a high-end chain (which you'd probably know about if you did) I'd expect a new chain to cost about 10 dollars/pounds/euros ("about" means the currency unit doesn't matter much among those), new rear cogs to be about 25 and new chainrings maybe 30ish. Plus labour.






share|improve this answer


























  • Agreed. Just want to point out that for nicer components (e.g. a recent 11 speed Ultegra or SRAM Force group) you can pretty much double the price estimates.

    – Michael
    yesterday






  • 2





    Is the condescending statement strictly necessary? " (because people who have higher-end components tend to know more about their bike than you do)"

    – trognanders
    20 hours ago






  • 1





    @trognanders I was trying not to be condescending, and I'm sorry it came across that way. If anyone can phrase it better, please do suggest something. I think it's an important point, which needs to be made somehow. The asker has been told that a new chain will be expensive: unless the asker has a high-end bike (and most people who've spent $1000+ on a bike know it), a new chain isn't expensive at all.

    – David Richerby
    18 hours ago








  • 1





    @DavidRicherby A new cassette + chain + labor could easily range in the 100 USD. It's not exactly inexpensive. Especially when you can get a used bicycle for less than that.

    – Antzi
    18 hours ago











  • @Antzi I already covered all of that in my answer. But the chain itself shouldn't be much more than $10 or so of that.

    – David Richerby
    17 hours ago



















1














Well, if chain is worn, it might snap when you push pedal strong, which will cause your leg that was pushing to drop down very fast, and as consequence you could loose balance and fall.



That is explanation why it is unsafe. As others have pointed out it is economically unsound not to change it since it will cause damage on other more expensive parts. Something like insisting not to change oil in your car because it is expensive (and you might need to change filter with it!), or brake fluid.



So while it is great to want understand things about your bicycle, you might want to give a bit more benefit of doubt to your bike mechanic.






share|improve this answer































    0














    Chains have a clearly defined specification for wear. Once the length of a specific number of links is longer than some maximum tolerance the chain should be replaced. If the chain is stretched, it is a good investment to replace it.



    A decent chain should be around $20-$40. They are very easy to replace. No, another wheel is not necessary. You do not have to buy a new cassette. Severely worn chains will eventually wear rear cassettes and cause performance issues though, so it is a thing to consider.



    Is there a safety issue? Maybe the chain will break and jam up your rear wheel causing a crash. Maybe it will break or slip and your foot will slip off causing a crash. Probably mostly a scare tactic, but not completely imaginary.






    share|improve this answer








    New contributor




    trognanders is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
    Check out our Code of Conduct.





















      Your Answer








      StackExchange.ready(function() {
      var channelOptions = {
      tags: "".split(" "),
      id: "126"
      };
      initTagRenderer("".split(" "), "".split(" "), channelOptions);

      StackExchange.using("externalEditor", function() {
      // Have to fire editor after snippets, if snippets enabled
      if (StackExchange.settings.snippets.snippetsEnabled) {
      StackExchange.using("snippets", function() {
      createEditor();
      });
      }
      else {
      createEditor();
      }
      });

      function createEditor() {
      StackExchange.prepareEditor({
      heartbeatType: 'answer',
      autoActivateHeartbeat: false,
      convertImagesToLinks: false,
      noModals: true,
      showLowRepImageUploadWarning: true,
      reputationToPostImages: null,
      bindNavPrevention: true,
      postfix: "",
      imageUploader: {
      brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
      contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
      allowUrls: true
      },
      noCode: true, onDemand: true,
      discardSelector: ".discard-answer"
      ,immediatelyShowMarkdownHelp:true
      });


      }
      });






      kennyB is a new contributor. Be nice, and check out our Code of Conduct.










      draft saved

      draft discarded


















      StackExchange.ready(
      function () {
      StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fbicycles.stackexchange.com%2fquestions%2f60202%2fwhy-is-an-old-chain-unsafe%23new-answer', 'question_page');
      }
      );

      Post as a guest















      Required, but never shown

























      4 Answers
      4






      active

      oldest

      votes








      4 Answers
      4






      active

      oldest

      votes









      active

      oldest

      votes






      active

      oldest

      votes









      19














      A worn, stretched chain will accelerate wear on sprocket and chainring teeth. There will then be a greater chance that the chain will slip off of and override the sprocket teeth as you apply a power stroke through the crank. When this happens the pedal and your foot suddenly slips downward, which could throw you off the bike, especially if you were off the saddle and standing on the pedals.



      A new chain is not usually regarded as a 'great cost'. They are not cheap but not expensive either. There's no reason you need a new wheel, unless there are other problems of course. You probably do need a new cassette though.



      Whether you need to replace the chain and cassette depends on your situation, your bike and how you ride. If you have a quality bike, do a lot of miles and want an efficient drivetrain you absolutely should replace it. If you do a few casual miles occasionally and are not experiencing any problems you can probably get away with leaving it as it is.






      share|improve this answer



















      • 4





        I'm guessing the asker has a fairly low-specced bike, since most people who have nicer equipment know more about it. In that case, a new chain shouldn't cost more than about 10 dollars/euro/pounds, which is pretty cheap.

        – David Richerby
        yesterday











      • The mechanic said that I "might" need a new cassette, and, if so, this might mean I would also need a new wheel. Sounds like this was just bs? Terrible! Thanks heaps for this everybody. I will definitely change mechanics. It's definitely a problem that so many mechanics are also bike sales stores. Felt like they were just trying to get me to buy a new bike.

        – kennyB
        yesterday






      • 3





        @kennyB, if your chain has been out for a long time, it might have adversely affected the cassette - insofar the mechanic was speaking correctly. If buying a new wheel is cheaper than just replacing the cassette on the existing wheel, I'd look for a new shop... ;)

        – AnoE
        17 hours ago






      • 3





        @kennyB Just what sort of bicycle do you have? The only way I can imagine a competent bike mechanic thinking you need a new wheel is if you have a vintage hub that they don't manufacture cassettes and/or cassette tools for.

        – HAEM
        17 hours ago











      • "A worn, stretched chain will accelerate wear on sprocket and chainring teeth" - would love to see the science behind this as from my own experience I get more life out of the whole lot by continuing a worn chain with a worn cassette, than I ever did replacing chains regularly according to chain wear checkers. I'm not convinced they wear any faster, it's just a new chain won't mesh with a partly worn cassette so will skip, but worn will mesh fine with worn, so long as it's at the same rate. MTBs with 1x set ups and clutch mechs might however help matters.

        – tjmoore
        12 hours ago
















      19














      A worn, stretched chain will accelerate wear on sprocket and chainring teeth. There will then be a greater chance that the chain will slip off of and override the sprocket teeth as you apply a power stroke through the crank. When this happens the pedal and your foot suddenly slips downward, which could throw you off the bike, especially if you were off the saddle and standing on the pedals.



      A new chain is not usually regarded as a 'great cost'. They are not cheap but not expensive either. There's no reason you need a new wheel, unless there are other problems of course. You probably do need a new cassette though.



      Whether you need to replace the chain and cassette depends on your situation, your bike and how you ride. If you have a quality bike, do a lot of miles and want an efficient drivetrain you absolutely should replace it. If you do a few casual miles occasionally and are not experiencing any problems you can probably get away with leaving it as it is.






      share|improve this answer



















      • 4





        I'm guessing the asker has a fairly low-specced bike, since most people who have nicer equipment know more about it. In that case, a new chain shouldn't cost more than about 10 dollars/euro/pounds, which is pretty cheap.

        – David Richerby
        yesterday











      • The mechanic said that I "might" need a new cassette, and, if so, this might mean I would also need a new wheel. Sounds like this was just bs? Terrible! Thanks heaps for this everybody. I will definitely change mechanics. It's definitely a problem that so many mechanics are also bike sales stores. Felt like they were just trying to get me to buy a new bike.

        – kennyB
        yesterday






      • 3





        @kennyB, if your chain has been out for a long time, it might have adversely affected the cassette - insofar the mechanic was speaking correctly. If buying a new wheel is cheaper than just replacing the cassette on the existing wheel, I'd look for a new shop... ;)

        – AnoE
        17 hours ago






      • 3





        @kennyB Just what sort of bicycle do you have? The only way I can imagine a competent bike mechanic thinking you need a new wheel is if you have a vintage hub that they don't manufacture cassettes and/or cassette tools for.

        – HAEM
        17 hours ago











      • "A worn, stretched chain will accelerate wear on sprocket and chainring teeth" - would love to see the science behind this as from my own experience I get more life out of the whole lot by continuing a worn chain with a worn cassette, than I ever did replacing chains regularly according to chain wear checkers. I'm not convinced they wear any faster, it's just a new chain won't mesh with a partly worn cassette so will skip, but worn will mesh fine with worn, so long as it's at the same rate. MTBs with 1x set ups and clutch mechs might however help matters.

        – tjmoore
        12 hours ago














      19












      19








      19







      A worn, stretched chain will accelerate wear on sprocket and chainring teeth. There will then be a greater chance that the chain will slip off of and override the sprocket teeth as you apply a power stroke through the crank. When this happens the pedal and your foot suddenly slips downward, which could throw you off the bike, especially if you were off the saddle and standing on the pedals.



      A new chain is not usually regarded as a 'great cost'. They are not cheap but not expensive either. There's no reason you need a new wheel, unless there are other problems of course. You probably do need a new cassette though.



      Whether you need to replace the chain and cassette depends on your situation, your bike and how you ride. If you have a quality bike, do a lot of miles and want an efficient drivetrain you absolutely should replace it. If you do a few casual miles occasionally and are not experiencing any problems you can probably get away with leaving it as it is.






      share|improve this answer













      A worn, stretched chain will accelerate wear on sprocket and chainring teeth. There will then be a greater chance that the chain will slip off of and override the sprocket teeth as you apply a power stroke through the crank. When this happens the pedal and your foot suddenly slips downward, which could throw you off the bike, especially if you were off the saddle and standing on the pedals.



      A new chain is not usually regarded as a 'great cost'. They are not cheap but not expensive either. There's no reason you need a new wheel, unless there are other problems of course. You probably do need a new cassette though.



      Whether you need to replace the chain and cassette depends on your situation, your bike and how you ride. If you have a quality bike, do a lot of miles and want an efficient drivetrain you absolutely should replace it. If you do a few casual miles occasionally and are not experiencing any problems you can probably get away with leaving it as it is.







      share|improve this answer












      share|improve this answer



      share|improve this answer










      answered yesterday









      Argenti ApparatusArgenti Apparatus

      37.6k23993




      37.6k23993








      • 4





        I'm guessing the asker has a fairly low-specced bike, since most people who have nicer equipment know more about it. In that case, a new chain shouldn't cost more than about 10 dollars/euro/pounds, which is pretty cheap.

        – David Richerby
        yesterday











      • The mechanic said that I "might" need a new cassette, and, if so, this might mean I would also need a new wheel. Sounds like this was just bs? Terrible! Thanks heaps for this everybody. I will definitely change mechanics. It's definitely a problem that so many mechanics are also bike sales stores. Felt like they were just trying to get me to buy a new bike.

        – kennyB
        yesterday






      • 3





        @kennyB, if your chain has been out for a long time, it might have adversely affected the cassette - insofar the mechanic was speaking correctly. If buying a new wheel is cheaper than just replacing the cassette on the existing wheel, I'd look for a new shop... ;)

        – AnoE
        17 hours ago






      • 3





        @kennyB Just what sort of bicycle do you have? The only way I can imagine a competent bike mechanic thinking you need a new wheel is if you have a vintage hub that they don't manufacture cassettes and/or cassette tools for.

        – HAEM
        17 hours ago











      • "A worn, stretched chain will accelerate wear on sprocket and chainring teeth" - would love to see the science behind this as from my own experience I get more life out of the whole lot by continuing a worn chain with a worn cassette, than I ever did replacing chains regularly according to chain wear checkers. I'm not convinced they wear any faster, it's just a new chain won't mesh with a partly worn cassette so will skip, but worn will mesh fine with worn, so long as it's at the same rate. MTBs with 1x set ups and clutch mechs might however help matters.

        – tjmoore
        12 hours ago














      • 4





        I'm guessing the asker has a fairly low-specced bike, since most people who have nicer equipment know more about it. In that case, a new chain shouldn't cost more than about 10 dollars/euro/pounds, which is pretty cheap.

        – David Richerby
        yesterday











      • The mechanic said that I "might" need a new cassette, and, if so, this might mean I would also need a new wheel. Sounds like this was just bs? Terrible! Thanks heaps for this everybody. I will definitely change mechanics. It's definitely a problem that so many mechanics are also bike sales stores. Felt like they were just trying to get me to buy a new bike.

        – kennyB
        yesterday






      • 3





        @kennyB, if your chain has been out for a long time, it might have adversely affected the cassette - insofar the mechanic was speaking correctly. If buying a new wheel is cheaper than just replacing the cassette on the existing wheel, I'd look for a new shop... ;)

        – AnoE
        17 hours ago






      • 3





        @kennyB Just what sort of bicycle do you have? The only way I can imagine a competent bike mechanic thinking you need a new wheel is if you have a vintage hub that they don't manufacture cassettes and/or cassette tools for.

        – HAEM
        17 hours ago











      • "A worn, stretched chain will accelerate wear on sprocket and chainring teeth" - would love to see the science behind this as from my own experience I get more life out of the whole lot by continuing a worn chain with a worn cassette, than I ever did replacing chains regularly according to chain wear checkers. I'm not convinced they wear any faster, it's just a new chain won't mesh with a partly worn cassette so will skip, but worn will mesh fine with worn, so long as it's at the same rate. MTBs with 1x set ups and clutch mechs might however help matters.

        – tjmoore
        12 hours ago








      4




      4





      I'm guessing the asker has a fairly low-specced bike, since most people who have nicer equipment know more about it. In that case, a new chain shouldn't cost more than about 10 dollars/euro/pounds, which is pretty cheap.

      – David Richerby
      yesterday





      I'm guessing the asker has a fairly low-specced bike, since most people who have nicer equipment know more about it. In that case, a new chain shouldn't cost more than about 10 dollars/euro/pounds, which is pretty cheap.

      – David Richerby
      yesterday













      The mechanic said that I "might" need a new cassette, and, if so, this might mean I would also need a new wheel. Sounds like this was just bs? Terrible! Thanks heaps for this everybody. I will definitely change mechanics. It's definitely a problem that so many mechanics are also bike sales stores. Felt like they were just trying to get me to buy a new bike.

      – kennyB
      yesterday





      The mechanic said that I "might" need a new cassette, and, if so, this might mean I would also need a new wheel. Sounds like this was just bs? Terrible! Thanks heaps for this everybody. I will definitely change mechanics. It's definitely a problem that so many mechanics are also bike sales stores. Felt like they were just trying to get me to buy a new bike.

      – kennyB
      yesterday




      3




      3





      @kennyB, if your chain has been out for a long time, it might have adversely affected the cassette - insofar the mechanic was speaking correctly. If buying a new wheel is cheaper than just replacing the cassette on the existing wheel, I'd look for a new shop... ;)

      – AnoE
      17 hours ago





      @kennyB, if your chain has been out for a long time, it might have adversely affected the cassette - insofar the mechanic was speaking correctly. If buying a new wheel is cheaper than just replacing the cassette on the existing wheel, I'd look for a new shop... ;)

      – AnoE
      17 hours ago




      3




      3





      @kennyB Just what sort of bicycle do you have? The only way I can imagine a competent bike mechanic thinking you need a new wheel is if you have a vintage hub that they don't manufacture cassettes and/or cassette tools for.

      – HAEM
      17 hours ago





      @kennyB Just what sort of bicycle do you have? The only way I can imagine a competent bike mechanic thinking you need a new wheel is if you have a vintage hub that they don't manufacture cassettes and/or cassette tools for.

      – HAEM
      17 hours ago













      "A worn, stretched chain will accelerate wear on sprocket and chainring teeth" - would love to see the science behind this as from my own experience I get more life out of the whole lot by continuing a worn chain with a worn cassette, than I ever did replacing chains regularly according to chain wear checkers. I'm not convinced they wear any faster, it's just a new chain won't mesh with a partly worn cassette so will skip, but worn will mesh fine with worn, so long as it's at the same rate. MTBs with 1x set ups and clutch mechs might however help matters.

      – tjmoore
      12 hours ago





      "A worn, stretched chain will accelerate wear on sprocket and chainring teeth" - would love to see the science behind this as from my own experience I get more life out of the whole lot by continuing a worn chain with a worn cassette, than I ever did replacing chains regularly according to chain wear checkers. I'm not convinced they wear any faster, it's just a new chain won't mesh with a partly worn cassette so will skip, but worn will mesh fine with worn, so long as it's at the same rate. MTBs with 1x set ups and clutch mechs might however help matters.

      – tjmoore
      12 hours ago











      8














      As chains stretch, they wear the chainrings and rear cogs and the teeth on them start to become pointed and eventually don't grip the chain so well. The danger is that, when you push on the pedals, the chain slips from tooth to tooth on the chainring, which turns with much less resistance than you were expecting – you just have the friction of the chain slipping against the teeth, rather than the resistance of you driving the bike forwards. When the pedals suddenly turn much easier than you were expecting, you can very easily fall off the bike, especially if you were pushing hard, which is the time the chain is most likely to slip. Any time you fall off the bike while you're just cycling along in traffic is a potential under-a-truck moment. To some extent, you can mitigate this by cycling gently but there's always the risk that you try to pedal hard in some kind of emergency situation, forget that you can't do that, and come off.



      Having said that, there is something a little confusing. Maybe you just misunderstood your mechanic, but there's no reason that you should require a new wheel, unless that's completely independent from your need for a new chain. However, you may well need new chainrings and new rear cogs: because the stretched chain wears them to match itself, they'll also skip with a new chain.



      Unless you need a high-end chain (which you'd probably know about if you did) I'd expect a new chain to cost about 10 dollars/pounds/euros ("about" means the currency unit doesn't matter much among those), new rear cogs to be about 25 and new chainrings maybe 30ish. Plus labour.






      share|improve this answer


























      • Agreed. Just want to point out that for nicer components (e.g. a recent 11 speed Ultegra or SRAM Force group) you can pretty much double the price estimates.

        – Michael
        yesterday






      • 2





        Is the condescending statement strictly necessary? " (because people who have higher-end components tend to know more about their bike than you do)"

        – trognanders
        20 hours ago






      • 1





        @trognanders I was trying not to be condescending, and I'm sorry it came across that way. If anyone can phrase it better, please do suggest something. I think it's an important point, which needs to be made somehow. The asker has been told that a new chain will be expensive: unless the asker has a high-end bike (and most people who've spent $1000+ on a bike know it), a new chain isn't expensive at all.

        – David Richerby
        18 hours ago








      • 1





        @DavidRicherby A new cassette + chain + labor could easily range in the 100 USD. It's not exactly inexpensive. Especially when you can get a used bicycle for less than that.

        – Antzi
        18 hours ago











      • @Antzi I already covered all of that in my answer. But the chain itself shouldn't be much more than $10 or so of that.

        – David Richerby
        17 hours ago
















      8














      As chains stretch, they wear the chainrings and rear cogs and the teeth on them start to become pointed and eventually don't grip the chain so well. The danger is that, when you push on the pedals, the chain slips from tooth to tooth on the chainring, which turns with much less resistance than you were expecting – you just have the friction of the chain slipping against the teeth, rather than the resistance of you driving the bike forwards. When the pedals suddenly turn much easier than you were expecting, you can very easily fall off the bike, especially if you were pushing hard, which is the time the chain is most likely to slip. Any time you fall off the bike while you're just cycling along in traffic is a potential under-a-truck moment. To some extent, you can mitigate this by cycling gently but there's always the risk that you try to pedal hard in some kind of emergency situation, forget that you can't do that, and come off.



      Having said that, there is something a little confusing. Maybe you just misunderstood your mechanic, but there's no reason that you should require a new wheel, unless that's completely independent from your need for a new chain. However, you may well need new chainrings and new rear cogs: because the stretched chain wears them to match itself, they'll also skip with a new chain.



      Unless you need a high-end chain (which you'd probably know about if you did) I'd expect a new chain to cost about 10 dollars/pounds/euros ("about" means the currency unit doesn't matter much among those), new rear cogs to be about 25 and new chainrings maybe 30ish. Plus labour.






      share|improve this answer


























      • Agreed. Just want to point out that for nicer components (e.g. a recent 11 speed Ultegra or SRAM Force group) you can pretty much double the price estimates.

        – Michael
        yesterday






      • 2





        Is the condescending statement strictly necessary? " (because people who have higher-end components tend to know more about their bike than you do)"

        – trognanders
        20 hours ago






      • 1





        @trognanders I was trying not to be condescending, and I'm sorry it came across that way. If anyone can phrase it better, please do suggest something. I think it's an important point, which needs to be made somehow. The asker has been told that a new chain will be expensive: unless the asker has a high-end bike (and most people who've spent $1000+ on a bike know it), a new chain isn't expensive at all.

        – David Richerby
        18 hours ago








      • 1





        @DavidRicherby A new cassette + chain + labor could easily range in the 100 USD. It's not exactly inexpensive. Especially when you can get a used bicycle for less than that.

        – Antzi
        18 hours ago











      • @Antzi I already covered all of that in my answer. But the chain itself shouldn't be much more than $10 or so of that.

        – David Richerby
        17 hours ago














      8












      8








      8







      As chains stretch, they wear the chainrings and rear cogs and the teeth on them start to become pointed and eventually don't grip the chain so well. The danger is that, when you push on the pedals, the chain slips from tooth to tooth on the chainring, which turns with much less resistance than you were expecting – you just have the friction of the chain slipping against the teeth, rather than the resistance of you driving the bike forwards. When the pedals suddenly turn much easier than you were expecting, you can very easily fall off the bike, especially if you were pushing hard, which is the time the chain is most likely to slip. Any time you fall off the bike while you're just cycling along in traffic is a potential under-a-truck moment. To some extent, you can mitigate this by cycling gently but there's always the risk that you try to pedal hard in some kind of emergency situation, forget that you can't do that, and come off.



      Having said that, there is something a little confusing. Maybe you just misunderstood your mechanic, but there's no reason that you should require a new wheel, unless that's completely independent from your need for a new chain. However, you may well need new chainrings and new rear cogs: because the stretched chain wears them to match itself, they'll also skip with a new chain.



      Unless you need a high-end chain (which you'd probably know about if you did) I'd expect a new chain to cost about 10 dollars/pounds/euros ("about" means the currency unit doesn't matter much among those), new rear cogs to be about 25 and new chainrings maybe 30ish. Plus labour.






      share|improve this answer















      As chains stretch, they wear the chainrings and rear cogs and the teeth on them start to become pointed and eventually don't grip the chain so well. The danger is that, when you push on the pedals, the chain slips from tooth to tooth on the chainring, which turns with much less resistance than you were expecting – you just have the friction of the chain slipping against the teeth, rather than the resistance of you driving the bike forwards. When the pedals suddenly turn much easier than you were expecting, you can very easily fall off the bike, especially if you were pushing hard, which is the time the chain is most likely to slip. Any time you fall off the bike while you're just cycling along in traffic is a potential under-a-truck moment. To some extent, you can mitigate this by cycling gently but there's always the risk that you try to pedal hard in some kind of emergency situation, forget that you can't do that, and come off.



      Having said that, there is something a little confusing. Maybe you just misunderstood your mechanic, but there's no reason that you should require a new wheel, unless that's completely independent from your need for a new chain. However, you may well need new chainrings and new rear cogs: because the stretched chain wears them to match itself, they'll also skip with a new chain.



      Unless you need a high-end chain (which you'd probably know about if you did) I'd expect a new chain to cost about 10 dollars/pounds/euros ("about" means the currency unit doesn't matter much among those), new rear cogs to be about 25 and new chainrings maybe 30ish. Plus labour.







      share|improve this answer














      share|improve this answer



      share|improve this answer








      edited 17 hours ago

























      answered yesterday









      David RicherbyDavid Richerby

      13.6k33668




      13.6k33668













      • Agreed. Just want to point out that for nicer components (e.g. a recent 11 speed Ultegra or SRAM Force group) you can pretty much double the price estimates.

        – Michael
        yesterday






      • 2





        Is the condescending statement strictly necessary? " (because people who have higher-end components tend to know more about their bike than you do)"

        – trognanders
        20 hours ago






      • 1





        @trognanders I was trying not to be condescending, and I'm sorry it came across that way. If anyone can phrase it better, please do suggest something. I think it's an important point, which needs to be made somehow. The asker has been told that a new chain will be expensive: unless the asker has a high-end bike (and most people who've spent $1000+ on a bike know it), a new chain isn't expensive at all.

        – David Richerby
        18 hours ago








      • 1





        @DavidRicherby A new cassette + chain + labor could easily range in the 100 USD. It's not exactly inexpensive. Especially when you can get a used bicycle for less than that.

        – Antzi
        18 hours ago











      • @Antzi I already covered all of that in my answer. But the chain itself shouldn't be much more than $10 or so of that.

        – David Richerby
        17 hours ago



















      • Agreed. Just want to point out that for nicer components (e.g. a recent 11 speed Ultegra or SRAM Force group) you can pretty much double the price estimates.

        – Michael
        yesterday






      • 2





        Is the condescending statement strictly necessary? " (because people who have higher-end components tend to know more about their bike than you do)"

        – trognanders
        20 hours ago






      • 1





        @trognanders I was trying not to be condescending, and I'm sorry it came across that way. If anyone can phrase it better, please do suggest something. I think it's an important point, which needs to be made somehow. The asker has been told that a new chain will be expensive: unless the asker has a high-end bike (and most people who've spent $1000+ on a bike know it), a new chain isn't expensive at all.

        – David Richerby
        18 hours ago








      • 1





        @DavidRicherby A new cassette + chain + labor could easily range in the 100 USD. It's not exactly inexpensive. Especially when you can get a used bicycle for less than that.

        – Antzi
        18 hours ago











      • @Antzi I already covered all of that in my answer. But the chain itself shouldn't be much more than $10 or so of that.

        – David Richerby
        17 hours ago

















      Agreed. Just want to point out that for nicer components (e.g. a recent 11 speed Ultegra or SRAM Force group) you can pretty much double the price estimates.

      – Michael
      yesterday





      Agreed. Just want to point out that for nicer components (e.g. a recent 11 speed Ultegra or SRAM Force group) you can pretty much double the price estimates.

      – Michael
      yesterday




      2




      2





      Is the condescending statement strictly necessary? " (because people who have higher-end components tend to know more about their bike than you do)"

      – trognanders
      20 hours ago





      Is the condescending statement strictly necessary? " (because people who have higher-end components tend to know more about their bike than you do)"

      – trognanders
      20 hours ago




      1




      1





      @trognanders I was trying not to be condescending, and I'm sorry it came across that way. If anyone can phrase it better, please do suggest something. I think it's an important point, which needs to be made somehow. The asker has been told that a new chain will be expensive: unless the asker has a high-end bike (and most people who've spent $1000+ on a bike know it), a new chain isn't expensive at all.

      – David Richerby
      18 hours ago







      @trognanders I was trying not to be condescending, and I'm sorry it came across that way. If anyone can phrase it better, please do suggest something. I think it's an important point, which needs to be made somehow. The asker has been told that a new chain will be expensive: unless the asker has a high-end bike (and most people who've spent $1000+ on a bike know it), a new chain isn't expensive at all.

      – David Richerby
      18 hours ago






      1




      1





      @DavidRicherby A new cassette + chain + labor could easily range in the 100 USD. It's not exactly inexpensive. Especially when you can get a used bicycle for less than that.

      – Antzi
      18 hours ago





      @DavidRicherby A new cassette + chain + labor could easily range in the 100 USD. It's not exactly inexpensive. Especially when you can get a used bicycle for less than that.

      – Antzi
      18 hours ago













      @Antzi I already covered all of that in my answer. But the chain itself shouldn't be much more than $10 or so of that.

      – David Richerby
      17 hours ago





      @Antzi I already covered all of that in my answer. But the chain itself shouldn't be much more than $10 or so of that.

      – David Richerby
      17 hours ago











      1














      Well, if chain is worn, it might snap when you push pedal strong, which will cause your leg that was pushing to drop down very fast, and as consequence you could loose balance and fall.



      That is explanation why it is unsafe. As others have pointed out it is economically unsound not to change it since it will cause damage on other more expensive parts. Something like insisting not to change oil in your car because it is expensive (and you might need to change filter with it!), or brake fluid.



      So while it is great to want understand things about your bicycle, you might want to give a bit more benefit of doubt to your bike mechanic.






      share|improve this answer




























        1














        Well, if chain is worn, it might snap when you push pedal strong, which will cause your leg that was pushing to drop down very fast, and as consequence you could loose balance and fall.



        That is explanation why it is unsafe. As others have pointed out it is economically unsound not to change it since it will cause damage on other more expensive parts. Something like insisting not to change oil in your car because it is expensive (and you might need to change filter with it!), or brake fluid.



        So while it is great to want understand things about your bicycle, you might want to give a bit more benefit of doubt to your bike mechanic.






        share|improve this answer


























          1












          1








          1







          Well, if chain is worn, it might snap when you push pedal strong, which will cause your leg that was pushing to drop down very fast, and as consequence you could loose balance and fall.



          That is explanation why it is unsafe. As others have pointed out it is economically unsound not to change it since it will cause damage on other more expensive parts. Something like insisting not to change oil in your car because it is expensive (and you might need to change filter with it!), or brake fluid.



          So while it is great to want understand things about your bicycle, you might want to give a bit more benefit of doubt to your bike mechanic.






          share|improve this answer













          Well, if chain is worn, it might snap when you push pedal strong, which will cause your leg that was pushing to drop down very fast, and as consequence you could loose balance and fall.



          That is explanation why it is unsafe. As others have pointed out it is economically unsound not to change it since it will cause damage on other more expensive parts. Something like insisting not to change oil in your car because it is expensive (and you might need to change filter with it!), or brake fluid.



          So while it is great to want understand things about your bicycle, you might want to give a bit more benefit of doubt to your bike mechanic.







          share|improve this answer












          share|improve this answer



          share|improve this answer










          answered 18 hours ago









          Davorin RuševljanDavorin Ruševljan

          1,503916




          1,503916























              0














              Chains have a clearly defined specification for wear. Once the length of a specific number of links is longer than some maximum tolerance the chain should be replaced. If the chain is stretched, it is a good investment to replace it.



              A decent chain should be around $20-$40. They are very easy to replace. No, another wheel is not necessary. You do not have to buy a new cassette. Severely worn chains will eventually wear rear cassettes and cause performance issues though, so it is a thing to consider.



              Is there a safety issue? Maybe the chain will break and jam up your rear wheel causing a crash. Maybe it will break or slip and your foot will slip off causing a crash. Probably mostly a scare tactic, but not completely imaginary.






              share|improve this answer








              New contributor




              trognanders is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
              Check out our Code of Conduct.

























                0














                Chains have a clearly defined specification for wear. Once the length of a specific number of links is longer than some maximum tolerance the chain should be replaced. If the chain is stretched, it is a good investment to replace it.



                A decent chain should be around $20-$40. They are very easy to replace. No, another wheel is not necessary. You do not have to buy a new cassette. Severely worn chains will eventually wear rear cassettes and cause performance issues though, so it is a thing to consider.



                Is there a safety issue? Maybe the chain will break and jam up your rear wheel causing a crash. Maybe it will break or slip and your foot will slip off causing a crash. Probably mostly a scare tactic, but not completely imaginary.






                share|improve this answer








                New contributor




                trognanders is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                Check out our Code of Conduct.























                  0












                  0








                  0







                  Chains have a clearly defined specification for wear. Once the length of a specific number of links is longer than some maximum tolerance the chain should be replaced. If the chain is stretched, it is a good investment to replace it.



                  A decent chain should be around $20-$40. They are very easy to replace. No, another wheel is not necessary. You do not have to buy a new cassette. Severely worn chains will eventually wear rear cassettes and cause performance issues though, so it is a thing to consider.



                  Is there a safety issue? Maybe the chain will break and jam up your rear wheel causing a crash. Maybe it will break or slip and your foot will slip off causing a crash. Probably mostly a scare tactic, but not completely imaginary.






                  share|improve this answer








                  New contributor




                  trognanders is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                  Check out our Code of Conduct.










                  Chains have a clearly defined specification for wear. Once the length of a specific number of links is longer than some maximum tolerance the chain should be replaced. If the chain is stretched, it is a good investment to replace it.



                  A decent chain should be around $20-$40. They are very easy to replace. No, another wheel is not necessary. You do not have to buy a new cassette. Severely worn chains will eventually wear rear cassettes and cause performance issues though, so it is a thing to consider.



                  Is there a safety issue? Maybe the chain will break and jam up your rear wheel causing a crash. Maybe it will break or slip and your foot will slip off causing a crash. Probably mostly a scare tactic, but not completely imaginary.







                  share|improve this answer








                  New contributor




                  trognanders is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                  Check out our Code of Conduct.









                  share|improve this answer



                  share|improve this answer






                  New contributor




                  trognanders is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                  Check out our Code of Conduct.









                  answered 20 hours ago









                  trognanderstrognanders

                  1011




                  1011




                  New contributor




                  trognanders is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                  Check out our Code of Conduct.





                  New contributor





                  trognanders is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                  Check out our Code of Conduct.






                  trognanders is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                  Check out our Code of Conduct.






















                      kennyB is a new contributor. Be nice, and check out our Code of Conduct.










                      draft saved

                      draft discarded


















                      kennyB is a new contributor. Be nice, and check out our Code of Conduct.













                      kennyB is a new contributor. Be nice, and check out our Code of Conduct.












                      kennyB is a new contributor. Be nice, and check out our Code of Conduct.
















                      Thanks for contributing an answer to Bicycles Stack Exchange!


                      • Please be sure to answer the question. Provide details and share your research!

                      But avoid



                      • Asking for help, clarification, or responding to other answers.

                      • Making statements based on opinion; back them up with references or personal experience.


                      To learn more, see our tips on writing great answers.




                      draft saved


                      draft discarded














                      StackExchange.ready(
                      function () {
                      StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fbicycles.stackexchange.com%2fquestions%2f60202%2fwhy-is-an-old-chain-unsafe%23new-answer', 'question_page');
                      }
                      );

                      Post as a guest















                      Required, but never shown





















































                      Required, but never shown














                      Required, but never shown












                      Required, but never shown







                      Required, but never shown

































                      Required, but never shown














                      Required, but never shown












                      Required, but never shown







                      Required, but never shown







                      Popular posts from this blog

                      Masuk log Menu navigasi

                      Identifying “long and narrow” polygons in with PostGISlength and width of polygonWhy postgis st_overlaps reports Qgis' “avoid intersections” generated polygon as overlapping with others?Adjusting polygons to boundary and filling holesDrawing polygons with fixed area?How to remove spikes in Polygons with PostGISDeleting sliver polygons after difference operation in QGIS?Snapping boundaries in PostGISSplit polygon into parts adding attributes based on underlying polygon in QGISSplitting overlap between polygons and assign to nearest polygon using PostGIS?Expanding polygons and clipping at midpoint?Removing Intersection of Buffers in Same Layers

                      Старые Смолеговицы Содержание История | География | Демография | Достопримечательности | Примечания | НавигацияHGЯOLHGЯOL41 206 832 01641 606 406 141Административно-территориальное деление Ленинградской области«Переписная оброчная книга Водской пятины 1500 года», С. 793«Карта Ингерманландии: Ивангорода, Яма, Копорья, Нотеборга», по материалам 1676 г.«Генеральная карта провинции Ингерманландии» Э. Белинга и А. Андерсина, 1704 г., составлена по материалам 1678 г.«Географический чертёж над Ижорскою землей со своими городами» Адриана Шонбека 1705 г.Новая и достоверная всей Ингерманландии ланткарта. Грав. А. Ростовцев. СПб., 1727 г.Топографическая карта Санкт-Петербургской губернии. 5-и верстка. Шуберт. 1834 г.Описание Санкт-Петербургской губернии по уездам и станамСпецкарта западной части России Ф. Ф. Шуберта. 1844 г.Алфавитный список селений по уездам и станам С.-Петербургской губернииСписки населённых мест Российской Империи, составленные и издаваемые центральным статистическим комитетом министерства внутренних дел. XXXVII. Санкт-Петербургская губерния. По состоянию на 1862 год. СПб. 1864. С. 203Материалы по статистике народного хозяйства в С.-Петербургской губернии. Вып. IX. Частновладельческое хозяйство в Ямбургском уезде. СПб, 1888, С. 146, С. 2, 7, 54Положение о гербе муниципального образования Курское сельское поселениеСправочник истории административно-территориального деления Ленинградской области.Топографическая карта Ленинградской области, квадрат О-35-23-В (Хотыницы), 1930 г.АрхивированоАдминистративно-территориальное деление Ленинградской области. — Л., 1933, С. 27, 198АрхивированоАдминистративно-экономический справочник по Ленинградской области. — Л., 1936, с. 219АрхивированоАдминистративно-территориальное деление Ленинградской области. — Л., 1966, с. 175АрхивированоАдминистративно-территориальное деление Ленинградской области. — Лениздат, 1973, С. 180АрхивированоАдминистративно-территориальное деление Ленинградской области. — Лениздат, 1990, ISBN 5-289-00612-5, С. 38АрхивированоАдминистративно-территориальное деление Ленинградской области. — СПб., 2007, с. 60АрхивированоКоряков Юрий База данных «Этно-языковой состав населённых пунктов России». Ленинградская область.Административно-территориальное деление Ленинградской области. — СПб, 1997, ISBN 5-86153-055-6, С. 41АрхивированоКультовый комплекс Старые Смолеговицы // Электронная энциклопедия ЭрмитажаПроблемы выявления, изучения и сохранения культовых комплексов с каменными крестами: по материалам работ 2016-2017 гг. в Ленинградской области