Ggtkuk

Cannot shrink btrfs filesystem although there is still data and metadata space left : ERROR: unable to resize '/home': No space left on device

From jafe to El-Guest

How to find image of a complex function with given constraints?

Does higher Oxidation/ reduction potential translate to higher energy storage in battery?

What is the process for purifying your home if you believe it may have been previously used for pagan worship?

Is it okay to majorly distort historical facts while writing a fiction story?

What steps are necessary to read a Modern SSD in Medieval Europe?

Traveling with my 5 year old daughter (as the father) without the mother from Germany to Mexico

Is dried pee considered dirt?

Is there a difference between "Fahrstuhl" and "Aufzug"?

Small nick on power cord from an electric alarm clock, and copper wiring exposed but intact

Can I calculate next year's exemptions based on this year's refund/amount owed?

Towers in the ocean; How deep can they be built?

Can Sneak Attack be used when hitting with an improvised weapon?

What are the unusually-enlarged wing sections on this P-38 Lightning?

Can this note be analyzed as a non-chord tone?

Does the Idaho Potato Commission associate potato skins with healthy eating?

What CSS properties can the br tag have?

Do I need to write [sic] when including a quotation with a number less than 10 that isn't written out?

free fall ellipse or parabola?

Reference request: Grassmannian and Plucker coordinates in type B, C, D

Is a distribution that is normal, but highly skewed, considered Gaussian?

The Ultimate Number Sequence Puzzle

Why am I getting "Static method cannot be referenced from a non static context: String String.valueOf(Object)"?

Help identifying an SMD component [duplicate]

1

$begingroup$

This question already has an answer here:

• 
  How do I identify this component? It just says 0 on it [duplicate]
  
  4 answers
  
  

I need help identifying an SMD component it is a small(1 mm X 1.5 mm) black part with an "O" written on top if it.
I think it is a Schottky diode for reverse polarity protection ?.

(Source, first part on codes beginning with O)

I have attached an image if that helps

The component in question is marked J2/J3 on the silk screen. Also, if it helps the image is of a remote control pcb.

PS: This is my first post so please let me know if i did something wrong :)

identification surface-mount infrared remote-control

share|improve this question

edited Mar 19 at 15:08

Electric_90

1,559519

asked Mar 19 at 7:43

Shailendra SoroutShailendra Sorout

353

$endgroup$

marked as duplicate by Community♦ Mar 19 at 8:28

This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.

• 
  
  
  

  
  1
  

  
  
  
  
  
  

  
  $begingroup$
  Welcome to EE StackExchange. It looks like zero ohm resistors. They are often used for configuration purposes if you have a variant of a PCB that needs to have some connections that another variant doesn't.
  $endgroup$
  – Peter Karlsen
  Mar 19 at 7:55
  

  
  
  
  


• 
  
  
  

  
  

  
  
  
  
  
  

  
  $begingroup$
  ok thanks. Also can you tell me what the 'J' on the silk screen usually stands for like a 'U' stands for an IC ,'R' for resistor ,'C' for capacitor etc.
  $endgroup$
  – Shailendra Sorout
  Mar 19 at 8:09
  

  
  
  
  

add a comment | 

1

$begingroup$

This question already has an answer here:

• 
  How do I identify this component? It just says 0 on it [duplicate]
  
  4 answers
  
  

I need help identifying an SMD component it is a small(1 mm X 1.5 mm) black part with an "O" written on top if it.
I think it is a Schottky diode for reverse polarity protection ?.

(Source, first part on codes beginning with O)

I have attached an image if that helps

The component in question is marked J2/J3 on the silk screen. Also, if it helps the image is of a remote control pcb.

PS: This is my first post so please let me know if i did something wrong :)

identification surface-mount infrared remote-control

share|improve this question

edited Mar 19 at 15:08

Electric_90

1,559519

asked Mar 19 at 7:43

Shailendra SoroutShailendra Sorout

353

$endgroup$

marked as duplicate by Community♦ Mar 19 at 8:28

This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.

• 
  
  
  

  
  1
  

  
  
  
  
  
  

  
  $begingroup$
  Welcome to EE StackExchange. It looks like zero ohm resistors. They are often used for configuration purposes if you have a variant of a PCB that needs to have some connections that another variant doesn't.
  $endgroup$
  – Peter Karlsen
  Mar 19 at 7:55
  

  
  
  
  


• 
  
  
  

  
  

  
  
  
  
  
  

  
  $begingroup$
  ok thanks. Also can you tell me what the 'J' on the silk screen usually stands for like a 'U' stands for an IC ,'R' for resistor ,'C' for capacitor etc.
  $endgroup$
  – Shailendra Sorout
  Mar 19 at 8:09
  

  
  
  
  

add a comment | 

$begingroup$

This question already has an answer here:

• 
  How do I identify this component? It just says 0 on it [duplicate]
  
  4 answers
  
  

I need help identifying an SMD component it is a small(1 mm X 1.5 mm) black part with an "O" written on top if it.
I think it is a Schottky diode for reverse polarity protection ?.

(Source, first part on codes beginning with O)

I have attached an image if that helps

The component in question is marked J2/J3 on the silk screen. Also, if it helps the image is of a remote control pcb.

PS: This is my first post so please let me know if i did something wrong :)

identification surface-mount infrared remote-control

share|improve this question

edited Mar 19 at 15:08

Electric_90

1,559519

asked Mar 19 at 7:43

Shailendra SoroutShailendra Sorout

353

$endgroup$

share|improve this question

edited Mar 19 at 15:08

Electric_90

1,559519

asked Mar 19 at 7:43

Shailendra SoroutShailendra Sorout

353

share|improve this question

edited Mar 19 at 15:08

Electric_90

1,559519

asked Mar 19 at 7:43

Shailendra SoroutShailendra Sorout

353

edited Mar 19 at 15:08

Electric_90

1,559519

edited Mar 19 at 15:08

Electric_90

1,559519

asked Mar 19 at 7:43

Shailendra SoroutShailendra Sorout

353

asked Mar 19 at 7:43

Shailendra SoroutShailendra Sorout

353

3 Answers
3

active

oldest

votes

3

$begingroup$

These are 0603 zero-ohm resistors - the "O" is actually a "0". Basically it is a solder jumper or jumper wire but in a machine assembly friendly package.

On single-layer boards these are often used to assist routing and jump over traces. This appears to be the case for J2 and J3.

They are also frequently used for changing configuration pins. You typically have two resistor footprints, one to VCC and one to GND. On this you can place a zero-ohm resistor on either footprint to pull the configuration pin low or high. This is sometimes known as "strapping" and appears to be what OP3 is used for.

share|improve this answer

answered Mar 19 at 8:05

Tom CarpenterTom Carpenter

40k375121

$endgroup$

• 
  
  
  

  
  

  
  
  
  
  
  

  
  $begingroup$
  Thanks :) I upvoted your answer but it did'nt count as my account is very new. :)
  $endgroup$
  – Shailendra Sorout
  Mar 19 at 8:14
  

  
  
  
  


• 
  
  
  

  
  

  
  
  
  
  
  

  
  $begingroup$
  You can accept the answer, which is more or less the same as upvoting.
  $endgroup$
  – Huisman
  Mar 19 at 8:23
  

  
  
  
  


• 
  
  
  

  
  

  
  
  
  
  
  

  
  $begingroup$
  Just found out that there is a feature for accepting answers :)
  $endgroup$
  – Shailendra Sorout
  Mar 19 at 8:30
  

  
  
  
  

add a comment | 

2

$begingroup$

I think it is a Schottky diode for reverse polarity protection

Very unlikely. A diode should have a different package, and a diode would usually have its cathode terminal marked.

You have a 0 Ohm resistor here, the label "J" may be because it's used as a jumper (see Peter Karlsen's comment).

share|improve this answer

answered Mar 19 at 8:13

micmic

908612

$endgroup$

• 
  
  
  

  
  

  
  
  
  
  
  

  
  $begingroup$
  Ahhh... thanks for clarifying I was wondering what the 'J' stood for :)
  $endgroup$
  – Shailendra Sorout
  Mar 19 at 8:16
  

  
  
  
  

add a comment | 

1

$begingroup$

That is an 0 Ohm Resistance. they also called SMD jumper resistors.

They are used as wire links to connect the traces on Surface mount boards, which can be assembled using pick and place machines easily. (same like jumper wires in through holes boards) and as well as changing the routing in pcb's

the size 1mm * 1.5mm indicates that it is 0603 SMD package.

share|improve this answer

answered Mar 19 at 8:25

Satish SingupuramSatish Singupuram

1,776317

$endgroup$

add a comment | 

3

$begingroup$

These are 0603 zero-ohm resistors - the "O" is actually a "0". Basically it is a solder jumper or jumper wire but in a machine assembly friendly package.

On single-layer boards these are often used to assist routing and jump over traces. This appears to be the case for J2 and J3.

They are also frequently used for changing configuration pins. You typically have two resistor footprints, one to VCC and one to GND. On this you can place a zero-ohm resistor on either footprint to pull the configuration pin low or high. This is sometimes known as "strapping" and appears to be what OP3 is used for.

share|improve this answer

answered Mar 19 at 8:05

Tom CarpenterTom Carpenter

40k375121

$endgroup$

• 
  
  
  

  
  

  
  
  
  
  
  

  
  $begingroup$
  Thanks :) I upvoted your answer but it did'nt count as my account is very new. :)
  $endgroup$
  – Shailendra Sorout
  Mar 19 at 8:14
  

  
  
  
  


• 
  
  
  

  
  

  
  
  
  
  
  

  
  $begingroup$
  You can accept the answer, which is more or less the same as upvoting.
  $endgroup$
  – Huisman
  Mar 19 at 8:23
  

  
  
  
  


• 
  
  
  

  
  

  
  
  
  
  
  

  
  $begingroup$
  Just found out that there is a feature for accepting answers :)
  $endgroup$
  – Shailendra Sorout
  Mar 19 at 8:30
  

  
  
  
  

add a comment | 

3

$begingroup$

These are 0603 zero-ohm resistors - the "O" is actually a "0". Basically it is a solder jumper or jumper wire but in a machine assembly friendly package.

On single-layer boards these are often used to assist routing and jump over traces. This appears to be the case for J2 and J3.

They are also frequently used for changing configuration pins. You typically have two resistor footprints, one to VCC and one to GND. On this you can place a zero-ohm resistor on either footprint to pull the configuration pin low or high. This is sometimes known as "strapping" and appears to be what OP3 is used for.

share|improve this answer

answered Mar 19 at 8:05

Tom CarpenterTom Carpenter

40k375121

$endgroup$

• 
  
  
  

  
  

  
  
  
  
  
  

  
  $begingroup$
  Thanks :) I upvoted your answer but it did'nt count as my account is very new. :)
  $endgroup$
  – Shailendra Sorout
  Mar 19 at 8:14
  

  
  
  
  


• 
  
  
  

  
  

  
  
  
  
  
  

  
  $begingroup$
  You can accept the answer, which is more or less the same as upvoting.
  $endgroup$
  – Huisman
  Mar 19 at 8:23
  

  
  
  
  


• 
  
  
  

  
  

  
  
  
  
  
  

  
  $begingroup$
  Just found out that there is a feature for accepting answers :)
  $endgroup$
  – Shailendra Sorout
  Mar 19 at 8:30
  

  
  
  
  

add a comment | 

$begingroup$

These are 0603 zero-ohm resistors - the "O" is actually a "0". Basically it is a solder jumper or jumper wire but in a machine assembly friendly package.

On single-layer boards these are often used to assist routing and jump over traces. This appears to be the case for J2 and J3.

They are also frequently used for changing configuration pins. You typically have two resistor footprints, one to VCC and one to GND. On this you can place a zero-ohm resistor on either footprint to pull the configuration pin low or high. This is sometimes known as "strapping" and appears to be what OP3 is used for.

share|improve this answer

answered Mar 19 at 8:05

Tom CarpenterTom Carpenter

40k375121

$endgroup$

share|improve this answer

answered Mar 19 at 8:05

Tom CarpenterTom Carpenter

40k375121

answered Mar 19 at 8:05

Tom CarpenterTom Carpenter

40k375121

answered Mar 19 at 8:05

Tom CarpenterTom Carpenter

40k375121

2

$begingroup$

I think it is a Schottky diode for reverse polarity protection

Very unlikely. A diode should have a different package, and a diode would usually have its cathode terminal marked.

You have a 0 Ohm resistor here, the label "J" may be because it's used as a jumper (see Peter Karlsen's comment).

share|improve this answer

answered Mar 19 at 8:13

micmic

908612

$endgroup$

• 
  
  
  

  
  

  
  
  
  
  
  

  
  $begingroup$
  Ahhh... thanks for clarifying I was wondering what the 'J' stood for :)
  $endgroup$
  – Shailendra Sorout
  Mar 19 at 8:16
  

  
  
  
  

add a comment | 

2

$begingroup$

I think it is a Schottky diode for reverse polarity protection

Very unlikely. A diode should have a different package, and a diode would usually have its cathode terminal marked.

You have a 0 Ohm resistor here, the label "J" may be because it's used as a jumper (see Peter Karlsen's comment).

share|improve this answer

answered Mar 19 at 8:13

micmic

908612

$endgroup$

• 
  
  
  

  
  

  
  
  
  
  
  

  
  $begingroup$
  Ahhh... thanks for clarifying I was wondering what the 'J' stood for :)
  $endgroup$
  – Shailendra Sorout
  Mar 19 at 8:16
  

  
  
  
  

add a comment | 

$begingroup$

I think it is a Schottky diode for reverse polarity protection

Very unlikely. A diode should have a different package, and a diode would usually have its cathode terminal marked.

You have a 0 Ohm resistor here, the label "J" may be because it's used as a jumper (see Peter Karlsen's comment).

share|improve this answer

answered Mar 19 at 8:13

micmic

908612

$endgroup$

share|improve this answer

answered Mar 19 at 8:13

micmic

908612

answered Mar 19 at 8:13

micmic

908612

answered Mar 19 at 8:13

micmic

908612

1

$begingroup$

That is an 0 Ohm Resistance. they also called SMD jumper resistors.

They are used as wire links to connect the traces on Surface mount boards, which can be assembled using pick and place machines easily. (same like jumper wires in through holes boards) and as well as changing the routing in pcb's

the size 1mm * 1.5mm indicates that it is 0603 SMD package.

share|improve this answer

answered Mar 19 at 8:25

Satish SingupuramSatish Singupuram

1,776317

$endgroup$

add a comment | 

1

$begingroup$

That is an 0 Ohm Resistance. they also called SMD jumper resistors.

They are used as wire links to connect the traces on Surface mount boards, which can be assembled using pick and place machines easily. (same like jumper wires in through holes boards) and as well as changing the routing in pcb's

the size 1mm * 1.5mm indicates that it is 0603 SMD package.

share|improve this answer

answered Mar 19 at 8:25

Satish SingupuramSatish Singupuram

1,776317

$endgroup$

add a comment | 

$begingroup$

That is an 0 Ohm Resistance. they also called SMD jumper resistors.

They are used as wire links to connect the traces on Surface mount boards, which can be assembled using pick and place machines easily. (same like jumper wires in through holes boards) and as well as changing the routing in pcb's

the size 1mm * 1.5mm indicates that it is 0603 SMD package.

share|improve this answer

answered Mar 19 at 8:25

Satish SingupuramSatish Singupuram

1,776317

$endgroup$

share|improve this answer

answered Mar 19 at 8:25

Satish SingupuramSatish Singupuram

1,776317

answered Mar 19 at 8:25

Satish SingupuramSatish Singupuram

1,776317

answered Mar 19 at 8:25

Satish SingupuramSatish Singupuram

1,776317